Student T-shaped chair on a flat-oval tube №4-7 (32450)

Height-adjustable T-chair №4-7

Dimensions: 391х485х740-860 mm.

Backrest size: 380x200 mm.

Seat size: 380x350 mm.

Weight: 5.3 kg.

The student's chair is intended for the equipment of educational premises of educational institutions. The chair can be adjusted in height:

• 380 mm (No. 4) - for students with height from 1450 mm to 1600 mm;
• 420 mm (No. 5) - for students with height from 1600 mm to 1750 mm;
• 460 mm (No. 6) - for students with a height of 1750 mm;
• 500 mm (No. 7) - for students with a height of more than 1850 mm.

The chair consists of a padded seat, backrest and metal frame.

• width - 391 mm;
• depth - 485 mm;
• height - 740, 780, 820, 860 mm;
• height up to upper base of the seat - 380, 420, 460, 500 mm;
• seat - 380x350 mm;
• back - 380x200 mm.

Seat and backrest made of curved plywood (8-9 mm thick). The corners of the seat and backrest and the front edge of the seat have a radius of curvature to prevent injury. The frame of the chair is made of a flat-oval pipe 30x15x1.2 mm, 38x20x1.2 mm and 50x30x1.2 with powder coating. The back and seat are attached to the frame with screws. Adjustment is carried out by means of a through nut-screw tie with fixation of the cap nut in the middle of the pipe to prevent unscrewing during loosening. On the lower part of the frame there is a hole in the form of a circle, through which the marking of the growth groups is visible when adjusting the height on the right stand from the side of the student. Plastic tips are fixed at the ends of the frame, which prevent injury to students and damage to the floor.

Frame color: light green (RAL6018), gray (RAL7035) or yellow (RAL1018).